4" Decal Uvdtf Wrap I Don't Give A F!ck Till The Meds Kick In Bear D195

4" UV DTF DECAL

Add vibrant, detailed designs to your favorite hard surfaces with our premium 4" UV DTF Decals! These ready-to-apply transfers make customizing quick and easy with no heat press, weeding, layering, or special equipment required.

PRODUCT DETAILS

• Includes ONE (1) UV DTF decal
• Approximately 4 inches at the longest dimension
• Premium full-color UV DTF print
• Strong permanent adhesive
• No heat press required
• No weeding or layering
• Easy peel-and-apply application
• Blank item is NOT included

HOW TO APPLY

1. Make sure your surface is smooth, completely clean, dry, and free of oils, dust, or fingerprints.
2. Before removing the backing, position the decal to check placement and fit.
3. Carefully remove the backing from the transfer.
4. Align the decal before allowing the adhesive to make full contact. UV DTF adhesive is very strong and cannot easily be repositioned once applied.
5. Press the decal firmly onto the surface, working from the center outward to minimize bubbles and wrinkles.
6. Firmly rub over the entire design using your fingers or a squeegee to ensure good adhesion.
7. Slowly peel away the clear carrier film. If any portion of the design begins to lift, lay the film back down, rub firmly, and continue peeling slowly.

PLEASE NOTE

UV DTF decals are intended for smooth, hard surfaces. Surface type, texture, coatings, and finishes can affect adhesion, so always use your best judgment when selecting an application surface.

UV DTF transfers use a strong permanent adhesive. Please take your time during placement and application. Creations With Purpose is not responsible for transfers damaged due to incorrect application, placement, or improper care.

Colors may vary slightly due to differences in monitors, screens, and the finished surface.