UVDTF 2x2.5 Spray Bottle School Buses 10006

2 X 2.5 UV DTF SPRAY BOTTLE WRAP

Create a cute customized spray bottle in minutes with our premium 2 x 2.5 UV DTF Spray Bottle Wraps! These ready-to-apply transfers feature vibrant, detailed designs and make customizing quick and easy with no heat press, weeding, layering, or special equipment required.

PRODUCT DETAILS

• Includes ONE (1) UV DTF spray bottle wrap
• Approximate design size: 2 x 2.5 inches
• Designed for compatible smooth, hard-surface spray bottles
• Premium full-color UV DTF print
• Strong permanent adhesive
• No heat press required
• No weeding or layering
• Easy peel-and-apply application
• Spray bottle is NOT included

HOW TO APPLY

1. Make sure the bottle surface is completely clean, dry, and free of oils, dust, or fingerprints.
2. Before removing the backing, position the transfer on the bottle to check placement and fit.
3. Carefully remove the backing from the transfer.
4. Align the design before allowing the adhesive to make full contact. UV DTF adhesive is very strong and cannot easily be repositioned once applied.
5. Slowly apply the transfer while pressing from the center outward to minimize bubbles and wrinkles.
6. Firmly rub over the entire design using your fingers or a squeegee to ensure good adhesion.
7. Slowly peel away the clear carrier film. If any portion of the design begins to lift, lay the film back down, rub firmly, and continue peeling slowly.

PLEASE NOTE

Spray bottle sizes, shapes, and surface finishes can vary by manufacturer. Always check the transfer against your bottle before application to confirm placement and fit.

UV DTF transfers use a strong permanent adhesive. Please take your time during placement and application. Creations With Purpose is not responsible for transfers damaged due to incorrect application, placement, or improper care.

Colors may vary slightly due to differences in monitors, screens, and the finished surface.